Wireless type: zigbee
Transmitting power: 2.4GHz
Communication distance: 100m (open environment)
Detection angle: ≤90°
Light detection: support
Power input: AC200V
Working temperature: -10℃~ 55℃
When disassembling, you need to be very careful, otherwise the built-in circuit is easy to disconnect
Accurate detection of dynamic/static
This product solves the pain points that traditional human sensors cannot detect the presence of a static human body.
Using advanced infrared radar technology, it can accurately detect whether there are people in the area, whether it is active or static.
Perceived light intensity
Intelligent adjustment of lights
Accurately perceive the indoor light intensity, Qinger automatically adjusts the brightness of the light according to the brightness of the indoor light, controls the light switch, and through radar detection, it is truly realized that the lights are on and the lights are off when people are walking.
Built-in multiple people and brightness sensors, through the MFAI intelligent algorithm can be refined
Quasi-identify the presence of people in the room. Conical detection range, suitable for room area of 6-25 square meters, sensing angle of 360 degrees. The diameter of the human body sensing range is 5 meters (installation height 2.8 meters, ground projection)
Mobile APP-key control
You can view indoor movement in real time through your mobile phone, and you can view the opening and closing conditions of indoor lights in real time.
With other smart devices, it can realize rich automation and scene control.
Zigbee gateway makes smart hardware respond faster and control smoother. Can still be used even if the network is disconnected
1. Applicable room area and sensing range
Applicable room area 6 -25 square meters, the longest side of the room must be less than 5 meters
-The sensing angle is 360°, the diameter of the human body sensing range is about 5 meters (installation height is 2.8 meters, ground projection)
2. Description of product installation requirements:
The product must be installed on the roof, vertically downward; the installation height range is 2.4-3.5 meters
The installation location must be 1.5- -2.5 meters away from the door
The installation location must be at least 0.5 meters away from the edge of the house and within 0.5 meters from the side of the center of the room.
After installation, please rotate the product and adjust the inclination so that the sensor on the side faces the center of the door
Perceived light intensityIntelligent adjustment of lights
Accurately perceive the indoor light intensity , butautomatically adjust the light brightness according tothe brightness ofthe indoor light
Mobile app , one key control
The mobile phone can view the indoor movement in real time ,and can view the opening and closing of indoor lights in real time .
MAFL accurately recognizes andperceives subtle movements of people oranimals in a wide range
Built-in multiple people and brightness sensors , through theMFAL intelligent algorithm can accurately identify the presencef people in the room
Accurate detection ofdynamic / static / human presence
Automatic light on when the human body moves
The human presence sensor is combined with the gateway smart wall switch to detect the presence of a human body in thebathroom and tum on the light . After the person leaves thebathroom , the light is automatically turned off
When going out and not at home , set the mode away fromhome , detect an abnormal break-in , and send out a warning bylinking with a siren . At the same time , linking with a camera tocapture a video and push it to the mobile APP
Multi-person sharing , smart life
Multiple mobile phones can control the samedevice without re-pairing , directly share existing devices
Product photo display